Handmade Scrapbook Embellishments – Polymer Clay Tutorial (by Angie)

Working with polymer clay is a lot like making cut out cookies or pie crusts.  You can roll it out and cut it with cookie cutters even if you like.  Just make sure that any tools you use remain dedicated to clay. You cannot transfer them back to using with food items.  There are specific tools you can get for polymer clay at your hobby store like rolling pins, small metal shape cutters and shaping tools, but you can also use other things you may already have around.  Things like an x-acto knife, pop bottle lids, a glass bottle (as a rolling pin), straws, toothpicks and charm shapes can be used as moulds and shape cutters as well.

One tip I should share with you is about preventing sticking.  Once you work the clay and warm it in your hands to make it pliable, you will find that it may be somewhat sticky.  To prevent the clay from leaving bits behind on your rolling pin, dust it with a little baking soda, flour or talcum powder.

Make Leaves

 

1. Warm some green polymer clay in your hands to warm it and make it pliable.
2. Roll it out fairly thinly using a rolling pin or glass bottle.
3. Use a metal charm (dusted with baking soda) to make an imprint in the clay.
4. Cut the leaf shape out using an x-acto knife.
5. Set aside on a parchment covered baking sheet to be baked according to manufacturer’s directions.

Make Flowers

1. Warm some medium pink polymer clay in your hands to warm it and make it pliable.
2. Roll it out fairly thinly using a rolling pin or glass bottle.
3. Use a small cup or bottle lid to cut a round shape in the clay.  Set aside.
4. From a lighter shade of pink polymer clay, prepared as above, cut out a smaller round shape using a pop bottle lid or another object.  Place this smaller circle on top of the medium pink circle. Lightly press down so they are attached.
5. Roll a snake shape from a dark shade of pink clay.  Divide it into 6 portions by cutting it with an x-acto knife.
6. Form each portion into a small ball in the palm of your hand.
7. Press down evenly around the larger medium pink circle.  I used the bottom of a water bottle lid to do the pressing.
8. Do the same ball technique with another shade of pink and press them down evenly in between the formerly done balls.
9. You have now made two layers of petals.
10. If desired, use a toothpick or other tool to make little holes through the centre of your flower.  You can leave it to look like a button centre or make dots all over.  Additionally, you can outline the petals, as shown, with little holes using the toothpick and also insert tiny glass beads into some of the holes.
11. Set aside on a parchment covered baking sheet to be baked according to manufacturer’s directions.

 

Make Buttons

You can use our molds to make buttons.

.

  Visit us on Etsy and Dawanda

Or make buttons yourself:

1. Warm some coloured polymer clay in your hands to warm it and make it pliable.
2. Roll it out fairly thinly using a rolling pin or glass bottle.
3. Use a small cup or bottle lid to cut a round shape in the clay.
4. Use a slightly smaller circular lid to make a slight indentation just inside the outer edge.
5. Make two or four holes in the centre area of your button so you can actually use the button and attach it with thread.  You can use a toothpick or special clay tool for this.
6. Make miniature sized buttons by using the end of a straw as a cutter!
7. Set aside on a parchment covered baking sheet to be baked according to manufacturer’s directions.
** For a shiny finish, you can glaze any of your polymer clay creations after they are baked.  As well, you can paint them for added interest.

Tutorial was made by Angie (http://www.scrapscene.com/2009/06/handmade-scrapbook-embellishments-polymer-clay-tutorial)